Werkzeuge Auto Reparatur Werkzeug Auto Dent Reparatur Dent Puller Kit 2 in 1

 

  How to use this dent removal without repair kits
  

  1. clean the dent with a clean, damp cloth;
  

  2. Assemble the glue in the glue gun, pull the trigger to let the glue stick in the glue gun, connect the power source and preheat for 5 minutes;
  

  3. Use a proper drawing seal. Large dent requires a large drawing seal. (Note: the larger the
  

  Drawing seal is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
  

  5. Quickly spot the drawing seal with hot melt glue in the center of the dent, press gently until the glue hardens and sticks (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly shorter in winter);
  

  6. Align the T-shaped repairer and press the drawing seal with hot melt glue, pull the sliding rod backwards to pull up the dent;
  

  7. Check with a line board. If dent still exists, knock it lightly with a flattening hammer or pen;
  

  8. Clean the repaired place with a clean, damp cloth.
 


 
  

 


 
  Material: carbon steel
 
 
   
 
 
  Size: 50CM
 
 
   
 
 
  Standard: Car dent repair tool, dent repair device, hail pit repair equipment